Products Sell Well All Over The World
Email:mike@hdjtsteel.com WhatsApp:+8613370855298
-
PRODUCT CENTERThe Main Steel Products Are Stainless Steel Coils, Stainless Steel Plates, Stainless Steel Rods, Stainless Steel Tubes, Stainless Steel Profiles, Stainless Steel Strips, Etc.
-
Product
Tel:+8613370855298
WhatsApp:+8613370855298
Wechat:+8613370855298
Email:mike@hdjtsteel.com
Address:No. 480, Jiangshan South Road, Former Development Zone, Qingdao, Shandong
316 and 316L stainless steels are molybdenum-containing stainless steels. The molybdenum content of 316L stainless steel is slightly higher than that of 316 stainless steel. Because of molybdenum in steel, the overall performance of 316L stainless steel is better than that of 310 and 304 stainless steel. At high temperature, 316 stainless steel has a wide range of uses when the concentration of sulphuric acid is lower than 15% and higher than 85%. 316 stainless steel also has good chloride corrosion performance, so it is usually used in marine environment. The maximum carbon content of 316L stainless steel is 0.03, which can be used in applications where annealing cannot be carried out after welding and maximum corrosion resistance is required.
More
316 316L Stainless Steel Sheet
Alloys 316 (UNS S31600) and 316L (UNS S31603) are molybdenum-bearing austenitic stainless steels, which are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Alloy 304. These alloys also offer higher creep, stress-to-rupture, and tensile strength at elevated temperatures. In addition to excellent corrosion resistance and strength properties, the Alloys 316 and 316L Cr-Ni-Mo alloys also provide excellent fabricability and formability which are typical of the austenitic stainless steels.
More
Stainless steel 310S is austenitic chromium, nickel stainless steel (.08% max carbon) with good oxidation resistance and strength at high temperatures. It resist oxidation in continuous service up to 2000ºF gave decreasing sulphur gasses are not present. It is additionally utilized for intermittent service at temperatures up to 1900°F due to it resists rescaling and has a low coefficient of expansion. This factor reduces the tendency of the steel to warp in heat service. 310s are same as 310 aside from lower carbon content to minimize carbide precipitation during welding.
More
AISI/SUS 309 Stainless Steel Plate
Resistance of corrosion for AISI/SUS 309 stainless is excellent,Type 309's content of carbon is higher than Type 309S.This material is mainly used in furnace parts,heating elements,boiler baffles,chemical processing equipment,etc.
More
Alloy 409 is a general purpose, chromium, titanium stabilized, ferritic stainless steel whose primary application is automotive exhaust systems. It contains 11% chromium which is the minimum amount for the formation of the passive surface film which gives stainless steels their corrosion resistance.
More
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel.
More
Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness.
More
With better strength at higher temperatures, Type 422 (S42200) is an appealing alternative to Type 403. Type 422 is a hardenable martensitic stainless steel which is being widely used for high temperatures up to 1200°F. It is capable of being heat treated to various high strength levels. It is often used in aircraft and power industries who require high strength/weight ratios from room temperature to 1200°F.
More
Alloy 420 is a hardenable, martensitic stainless steel that is a modification of Alloy 410. Similar to 410, it contains a minimum of 12% chromium, just sufficient enough to give corrosion resistant properties. Alloy 420 has higher carbon content than Alloy 410 which is designed to optimize strength and hardness characteristics. It has good ductility it the annealed condition but is capable of being hardened up to Rockwell hardness 50 HRC, the highest hardness of the 12% chromium grades.
More