Method for removing burrs from stainless steel tubes

In the production of stainless steel pipe, because of the influence of the production process, there may be excess burrs on it, which should be removed in time to prevent the normal use of it.Then what methods can we follow to remove the burr in time?

1, scraper method: the device is equipped with a blade, the pipe into the device to form a rotation, can be cut and scraped on the burr, scraped out of the burr from the hole.

2. Roller method: through repeated gravity rolling, the burr properties on the stainless steel tube become fine and soft to achieve the removal effect.

3. Oxidation method: gas flow is passed into the welding, and the waste heat in the pipe is burr oxidation falling off by itself.

4, hand pull: for some small burrs, directly pull out by hand without the help of a tool, but pay attention to the sharpness of the product to avoid cutting the stainless steel pipe.

When removing burrs, we must pay attention not to scratch the stainless steel tube, and when using it, it should be used correctly.In order to avoid burr, we can choose the appropriate method.And timely polish work.